Other products
One electric drive is not enough to provide full functionality of the electric vehicle. The driver must have the possibility to control the vehicle and its parameters. In this category of products are HV heaters, air conditioning compressors, gear shift selectors, acceleration pedals – all the components that complement the electric drive.
Products
ENxxxPTC006kW
HV HEATER – 6KW WATER PTC
The PTC liquid heater is intended for use in passenger vehicles, vans, and trucks. It is used to heat the liquid flowing in the vehicle cooling system.
ENxxxACC1108304
UNDERSLUNG MOUNTED ACCELERATOR PEDAL
The accelerator pedal is intended for use in passenger vehicles, vans, and trucks. The aim of the pedal is to convert the pressing of the pedal into a voltage signal. The voltage signal is transmitted to vehicle control unit, which controls the velocity and acceleration of the vehicle.
ENxxxSEL703
GEAR SHIFT SELECTOR – LEVER
The gear shift lever is intended to use in passenger vehicles, vans, and trucks. After pressing the blockade button, on the side of the lever, the gear can be changed to one of the three options: D(Drive – driving forward), N(Neutral), R(Reverse – retrograde). The lever is equipped with illuminated markings.
EN...
ACCELERATOR PEDAL
The accelerator pedal is intended for use in passenger vehicles, vans, and trucks. The aim of the pedal is to convert the pressing of the pedal into a voltage signal. The voltage signal is transmitted to vehicle control unit, which controls the velocity and acceleration of the vehicle.
ENCOMHQA2D
AIR CONDITIONING COMPRESSOR
The air conditioning compressor operates with a voltage range of 400V to 750V DC and has a 27 cc/r displacement. It has IP67 security level. It operates on the POE 68H type oil, R134a and R1234yf cooling factor. Controlled by setting the power and rotational speed. Compressor diagnostics are built-in with error communication via CAN bus.
ENCCS21000V200A
CCS charging socket
The CCS2 charging socket allows for charging of the electric vehicle and machine in AC and DC mode. The socket is equipped with contact temperature measurement, allowing you to control the charging process with maximum power. The CCS2 socket can be equipped with 12V and 24V locks.